Straight push lock to connect fittings: Material: Nickel-plated brass Minimum pressure: 0 bar Maximum pressure with fluids: 150 bar / 2200 Psi Maximum pressure with air: 30 bar / 450 PSI Temperature: -30°C / +150°C / -22°F / +300°F Threads: Tapered gas in conformity with ISO7.1, BS21, DIN2999 Metric tapered in conformity with UNI 7707 Connection Tubes: Plastic Tubes: PA6, PA66 for High Pressure PA11, PA12, Polyethylene, Polyurethane PEF, PTFE.
Fluids: Oil, Water, Grease/Lubrication
Note: Push-Lock can generally be used with PA-type tubing in regards to automated lubrication systems. Note however though that with steel pipe ends (20223,20224,20225,20216, etc) a specific groove needs to be present in the pipe end. The type of groove is also important. There are 2 types of grooves; V-groove and U-groove. Make sure the pipe with groove matches the push lock groove.
All pipe ends (with or without grooves) work with any matching sized and material compression fitting.
|